CHEVALIER-FALCON MACHINE TOOLS CO., LTD. Grinding, Milling, Turning, vertical trning

Features

One-piece construction with slant back, owns high rigidity and reliability. Gang- type tool selection, which shorts tools changing time, and improve working efficiency. Front moving coolant tray and rear/side chips conveyor make the footprint of the machine smaller It is ideal for high speed cutting on materials like steel, cooper, aluminum and casting. The machining accuracy of the workpiece is high. User-friendly operation design.

Specification

Mechanical Specifications		FBL-820A (GANG TYPE)	FBL-820 (TURRET TYPE)	FBL-1233 (BOX WAY RANGE)
Swing Over Bed	mm(")	Ø470 (18.5")	Ø470 (18.5")	Ø770 (30.3")
Swing over Cover	mm(")	Ø126 (5")	Ø126 (5")	Ø550 (21.7")
Max. Cutting Diameter	mm(")	Ø288 (11.3")	Ø260 (10.2")	Ø570 (22.4")
Cutting Diameter	mm(")	Ø126 (5")	Ø255 (10")	Ø305 (12")
Distance Between Centers	mm(")	Ø480 (18.9")	Ø 480 (18.9")	Ø1020 (40.2")
Spindle type	ASA	A2-6	A2-6	A2-8

Power Chuck Diameter	in	8"	8"	12"
Spindle Bearing Diameter	mm(")	-	-	6.3") Ø160
Spindle Hole Diameter	mm(")	Ø62 (2.4")	Ø62 (2.4")	Ø105 (4.1")
Spindle Speed	rpm	3500	3500	2500 (ZF Two-Stage Speed Change)
Spindle Drive (AC-30 min rating)	kw	7.5 / 11 (11 / 15 Opt.)	7.5 / 11 (11 / 15 Opt.)	22 / 26
Torque of Spinder	kgf-m	-	-	101
Max. Bar Material Diameter	mm(")	Ø52 (2")	Ø52 (2")	Ø91 (3.6")
Z-axis Travel	mm(")	450 (17.7")	450 (17.7")	320 (12.6")
X-axis Travel	mm(")	320 (12.6")	175 (6.9")	820 (32.3")
Rapid Traverse (X-axis / Z-axis)	M/min	15 / 15	15 / 15	18 / 18
Number of Tools	units	6	8	10 / 12 (Opt.)
Tool Shank	mm	25 x 25	25 x 25	32 x 32
Boring Bar Size	mm	Ø40	Ø40	Ø50
Tailstock Travel	mm	-	310	820
Liver Center Travel	mm	-	100	120
Quill Diameter	mm	-	75	4.3") 110
Quill Taper Hole	MT	-	4	5
Quill Activation	L	-	Hydraulic	-
Capacity of Coolant Tank	M	-	Manual	180
Dimentions (L x W x H)	M	2.7x 1.7x 1.6	2.7x 1.7x 1.6	4.6x 2.2x 2.2
Weight (approx)	lb/kg	7040/ 3200	7678/ 3490	9500/ 4320

Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference

Optional

FBL-820A/820 Chip conveyer & bucket (Rear or Side Exit). Parts catcher. Air blow installment. Crash proof system. Elastical collet system. Coolant system. Programmed tailstock. FBL-1223 Special chuck. EMC CE Safety Attachment. Warning light. Hydraulic automatic self-centering steady rests. Manual self-centering steady rests.