Machining Center 3060/ 3072VMC with HD Video | Chevalier

Features

By adopting 4 hardened square ways on OP2855,QP3560 & QP3572,and 6 hardened square ways on QP4088 & QP40128,and 8 hardened square ways on OP40168, on machine base, this design offers the most rigid support for X axis and Y axis loading. Large inside work area to assist work piece loading and unloading. And oversized Column Bottom also provides maximum support. The machine is constructed of high quality Meehanite cast iron, heat treated for deformation-free performance. Three axes slide ways are coated with Turcite B to ensure extremely smooth traverse and minimum wear on slide ways. Table and saddle are fully supported through the entire stroke without overhang problem. High precision class C3 ball screws on X,Y,Z axes.

Specification

DESCRIPTION	Unit	QP3560	QP3572
Travel
X Axis	mm(")	1530 (60.2")	1850 (72.8")
Y Axis	mm(")	900 (34.5")
Z Axis	mm(")	762 (30")
Table
Table Size	mm(")	1700x 860 (66.9"x 33.9")	2000x 860 (78.7"x 33.9")
T-Slots (no. x W x dis.)	mm(")	6x 18 x 125 (0.2"x 0.7"x 4.9")
Table Load	kg(lbs)	2500 (5500Ibs)

Spindle
Spindle Nose to Table	mm(")	200~962 (7.9"~37.9")	180~942 (7"~37")
Spindle Center to Column	mm(")	950 (37.4")
Spindle Taper(Standard/Opt.)		BT50/CT50/DIN50
Spindle Speed(Standard/Opt.)	r.p.m.	6000/8000
Feed Rates
Rapid on (X/Y/Z) Axes	m/min(fpm)	15/ 15/ 12 (590/ 590/ 472 IPM)
Cutting Feed Rate		1~5000
Diameter & Pitch of Ballscrew	mm(")	Ø50x P10 (Ø2"x P10)
Accuracy
Positioning		±0.005/300 (±0.0002"/11.8")
Repeatability	mm(")	±0.005(±0.0002")
Tool Changer
Tool Capacity(Standard/Opt.)		24/32
Change Time	sec.	5
Tool Shank		BT50/CT-50/DIN-50
Pull Stud		P40T-1
Max. Tool Diameter(with adjacent tools)	mm(")	24T/110, 32T/127(24T/4.3",32T/5")
Max. Tool Diameter(without adjacent tools)		24T/200, 32T/229(24T/7.9",32T/9")
Max. Tool Weight	kg(lbs)	15
Motors
Spindle Motor(Standard/Opt.)	HP	20HP Wide Range (Belt)/30HP (Gear)
Coolant Pump	HP	1/2HP
Tool Changer
Power Required	KVA	38
Air Required	kg/cm² L/,min	5kg/cm², 200L/min
Floor Space	mm(")	4300x 3655x (169.3"x 143.9")	5084x 3655 (200.1"x 143.9")
Machine Net Weight, approx	kg(lbs)	14000kg (30800Ibs)	14500kg (31900Ibs)

Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference

Optional

Through spindle coolant system. X,Y axis ballscrew with coolant system. 4^thaxis rotary table. Swivelling head. Linear scales. Chip conveyor. Fully enclosed splash guard. 32 station ATC. CE conformity.