Machining Center FVM-8088DC with HD Video | Chevalier

Features

Extremely Rigid and Stable Structure The oversized column combined with box type beam construction features additional machine rigidity. The slant beam construction with increased slideway surfaces efficiently upgrades force distribution area this results in greater stability. This results in greater stability. The spindle head is located at the center of beam, providing high movement accuracy, superior heavy cutting capability and outstanding rigidity. The spindle position is specially designed with symmetrical to center. The spindle, spindle motor ball screw and double counter-balancing cylinders are all properly located at the best positions to avoid unequal torque, while assuring the best structural accuracy. The double counter – balancing cylinders on Z-axis are suspension supported. They are close to the movement gravity center, and are symmetrical to the spindle drive ball screw and the center of spindle motor. This optional position design not only fully eliminates the possibility of unequal torque, but also provides high-feed accuracy and machining accuracy. Linear ways on X/Y-axis combined with box ways on Z axis.

Specification

MODEL		Unit	FVM-80125DC	FVM-80160DC
Table	Table Size	mm(")	3200x1800 (126x70.8)	4200x1800 (165.3x70.8)
	Table Loading	kg	10000 (22000)	12000 (26400)
	Work piece	mm(")	3100x1900x1000	3900x1900x1000
T Slots	(W×P.C×Pitch)	mm(")	28x11x170 (1.1x0.43x6.7)

Travel	X Axis	mm(")	3200 (126)	4000 (158)
	Y Axis	mm(")	2100 (82.6)
	Z Axis	mm(")	1000 (39.3)
	Spindle nose to table surface	mm(")	1250 (49.2)
	Distance between the Column	mm(")	2200 (87)
Spindle	Spindle Taper	-	BT/CAT/DIN 50
	Spindle Speed	r.p.m.	6000/Opt.8000, 10000
	Spindle Power	kw	22.5 (30)/ Opt.26 (35)
	Spindle Chiller		With 22# Oil circulated cooling
Accuracy	Positioning	mm(")	±0.005 (0.0002)/300 (12) ±0.015 (0.0006) Full stroke
			P:0.03 (0.0012)
	Repeatability	mm(")	±0.003(0.0012)	±0.005(0.0002)
			PS:0.025 (0.001)
Feed Rate	X、Y Rapid Feed	M/min.	10
	Z Rapid Feed	M/min.	12
	Cutting Feed Rate	mm(")	1 ~ 7
A.T.C	A.T.C		40/ Opt.60
	Max.Tool Length	mm(")	127(5) With adjacent tool
		mm(")	215 (8.5) Without adjacent tool
	Max. Tool Length	mm(")	350mm(13.7”)
	Max. Tool Weight	kg	20(44)
Guide Way	LM Guide Size (L×W)/ P.C	mm(")	5800x5 5/2	8100x5 5/2
	Guide Way P.C	set	10	14
	Y/Z Axes Box Way width/Y/Z	mm(")	175 (6.8)/ 70 (2.7)
Lubrication Unit	Lub. Tank (2 sets)	L	4/ 12
Air Unit	Air System Tank	L	1500
	Air System Pressure	kg / cm²	6
Coolant Unit	Coolant Tank	L	600
	Coolant Unit Motor	HP	2HP
Power	Required Electric Power	kw	50
Machine Size	Installation Area (Lx Wx H)	mm(")	8500x5300 x5700	11000x5300 x5700
	Machine Weight (net/gross)	kg	37000/40000 (81400/88000)	42000/46000 (92400/101200)
Controller	Controller Brand		FANUC/SELCA

Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference

Optional

Manual 90° deg. head 90° deg. head(Auto index in 15 or 5 degree) Five face milling head(Auto index in 15 or 5 degree) Universal auto tool changer 60T