Machining Center QP2033/2040 with HD Video | Chevalier

Features

Quick Floating Type Tool Release system. Workpiece measurement (Option). Easy chip flow splash guard design. Three axes C3 pretensioned ballscrew, Ø40mm x P12mm. Unlike bolts tightened motor seat, this new design provides much higher accuracy & rigidity! Optional ZF gearbox. 300 psi (20 bar) Coolant-Through-Spindle System (option).

Specification

DESCRIPTION	QP2033	QP2040
Table
Table	1000x 500mm (39.4"x 19.7")	1200x 500mm (47.2"x 19.7")
T-slots (no x wid x dis)	5x 18x 100mm (5"x 0.709"x 3.937")	5x 18x 100mm (8"x 0.709"x 3.937")
Table Load	500kg (1100lbs)	600kg (1320lbs)
Travel
X Travel	850mm (33.5")	1020mm (40.2")
Y Travel	510mm (21.7")
Z Travel	510mm (21.7")

Spindle
Spindle Nose to Table	150~660mm (5.9"~26")
Spindle Center to column	550mm (21.7")
Spindle Taper	7/24 (#40)
Spindle Speed	Belt Drive :8000rpm:10000rpm/12000rpm (Opt.) Direct Drive : 12000rpm/15000rpm (Opt.)
Feed Rates
Rapid on (X/Y/Z) Axes	24/ 24/ 20m/min (945/ 945/ 787ipm)
Cutting Feedrate	1~10000mm/min (0.04~394ipm)
Accuracy
Positioning	VDI 3441 P ±0.006mm
Repeatability	VDI 3441 PS ±0.007mm
Tool Changer
Tool Changer	24 Arm type 32 Chain type/20 Carousal type (Opt.)
Tool Shank	BT40, CT40 or DIN40
Pull Stud	JMBTA standard 45°
Max. Tool Diameter	4" (100mm), opt.24 station cam-arm type 76mm (3")
Max. Tool Weight	7kg (15lbs)
Motors
Spindle Servo Motor	15HP (15min)
Feeding SystemMotors X,Y,Z	1.8/1.8/2.5kw (2.4/2.4/3.4HP)
Coolant Pump	1/2HP (0.38kW)
General
Power Required	20kVA
Air Required	80 PSI (5kg/cm² ), 200L/min
Machine Size (Lx Wx H)	2770x 2425x 2532mm (109"x 95.5"x 100")
Machine weight (Approx.)	5550kg (12210lbs)	5800kg (12760lbs)

Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference

Optional

BT40 or CT40 or DIN-40, JT-40 pull suds Chip conveyor. Belt drive:10,000/12000rpm spindle. Directly coupled: 12000/15000rpm spindle. 4th axis preparation. 4th axis complete set. Spindle oil chiller. Collant through spindle. Automatic tool length measurement. Heat exchanger for electric cabinet. Dual screw type chip conveyor. 20-station carousel type ATC. 32-statsion chain type tool magazine. Oil skimmer. Air gun. Coolant gun. Linear scales. ZF gear box.