Vertical Machining Centers (Linear Ways) - QP2026-L/2033-L/2040-L with HD Video

Features

Quick Floating Type Tool Release system. Workpiece measurement (Option). Easy chip flow splash guard design. Three axes C3 pretensioned ballscrew, Ø40mm x P12mm. Unlike bolts tightened motor seat, this new design provides much higher accuracy & rigidity! Optional ZF gearbox. 300 psi (20 bar) Coolant-Through-Spindle System (option).

Specification

DESCRIPTION	QP2026-L	QP2033-L	QP2040-L
Table
Table Size	810x 510mm (31.9"x 20")	1000x 510mm (39.4"x 20")	1200x 510mm (47.2"x 20")
T-slots (no x wid x dis)	5x 18x 100mm (5"x 0.709"x 3.937")
Table Load	500kg (1100lbg)		600kg (1320lbg)
Travel
X Travel	660mm (26")	850mm (33.5")	1020mm (40.2")
Y Travel	530mm (21")
Z Travel	510mm (20.1")

Spindle
Spindle Nose to Table	150~660mm (5.9" ~26")		130~640mm (5.1" ~25.2")
Spindle Center to column	585mm (23")
Spindle Taper	7/24 (#40)
Spindle Speed	Belt Drive : 80~8000rpm Belt Drive : 10000/12000rpm (Opt.) Direct Drive : 12000rpm/15000rpm (Opt.)
Spindle Diameter	70mm (2.8")
Feed Rates
Rapid on (X/Y/Z) Axes	30/ 30/ 24m/min (1180/ 1180/ 944ipm) Opt.36/36/30m/min (1417/ 1417/ 1181ipm)
Cutting Feedrate	1~10000mm/min (0.04~394 ipm)
Diameter & Pitch of Ballscrew	40mm, P12
Accuracy
Positioning (Approx.)	JIS ± 0.010mm, VDI3441P 0.010mm
Repeatability (Approx.)	JIS± 0.003mm, VDI3441PS 0.007mm
Tool Changer
Tool Positions	24 Arm type 32Chain type/20 Carousal type (Opt.)
Tool Shank	BT40, CT40 or DIN40
Pull Stud	P40T-1
Max. Tool Diameter	24 station cam-arm type 80mm (3.15")
Max. Tool Legth	300mm
Max. Tool Weight	7kg (15lbs)
Motors
Spindle Motor	(F)Belt drive7.5/11kw (cont./15min) (S)Belt drive9/12kw, (H)Belt drive7.5/13kw
Feeding SystemMotors X,Y,Z	(F)1.8/1.8/2.5kw (Opt.3.0/3.0/4.0kw)
Coolant Pump	1HP (0.76kW)
General
Power Required	20KVA (Opt.25KVA)
Air Required	80 PSI (5kg/cm²),200L/min
Machine Size (Lx Wx H)	2200x2115x 2583mm (87"x83"x 101")	2430x2115x 2583mm (95.6"x83"x101")	2800x 2115x 2583mm (110"x 83"x 101")
Machine weight (Approx.)	12200lbs (5550kg)	12800lbs (5800kg)	13700lbs (6200kg)

Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference

Optional

BT40 or CT40 or DIN-40, JT-40 pull suds. Chip conveyor. Belt drive: 10000/12000rpm spindle. Directly coupled: 12000/15000rpm spindle . 4^th Axis Preparation. 4^th Axis complete set. Spindle oil chiller. Collant through spindle. Automatic tool length measurement. Heat exchanger for electric cabinet. Dual screw type chip conveyor. 20-statsion chain type ATC. 32-statsion chain type tool magazine. Oil Skimmer. Air Gun. Coolant Gun. Linear scales.